Mounting artwork on paper

A paperweight with a felt back will do as well. It might be necessary to clean the glass two or three times. Try to avoid any wrinkles in the tape. Gently lift the corner of your artwork.

It is standard for prints, charcoal drawings, illustrations, and any pen and ink on paper where the artifact itself--the piece of paper--showcases the rough edge of the paper. Place the frame, tape-side down on the craft paper.

Archival linen hinging tape to attach the artwork to the backing board. Double-stick adhesive tape makes this process easy. Double-check your measurements with a ruler.

In a pinch, you can use a heavy-duty staple gun and some type of fastener from a hardware store. Then press in the second piece of backing board in place. Using a specialty tool like a dual point driver makes this task much easier. Clean and Assemble the Frame Pull the dual point tabs out of the back of the frame using pliers.

Press the driver down on the spacers and then into the frame. Measure the interior of the frame and cut the self-adhesive spacers to fit snugly inside the edges of the frame. Remove the self-adhesive backing and position the spacers on the glass as close to the frame edges as possible.

Float Mounting Introduction Float mounting creates a seamless presentation. Wire cutters to cut the spacers Pliers to remove frame tabs Bullfrog clips or sliding clips to hold your artwork while you secure it. Press the artwork into the frame. They come in lengths of about six feet and can be easily purchased in frame supply stores.

Do this for all four corners. Dual point driver and points: Basic Framing Materials and Tools Frame Bone or plastic paper folder and scorer to smooth the mat board cuts White emery board Microfiber cloth--use a lint-free cleaning cloth Craft paper for sealing the back of the frame from dust Archival double-sided tape or other adhesive D-rings and small screws to hold the hanging wire Cordless screwdriver or drill to secure the D-rings Braided wire to hang the fame Backing board: The backing board will come into contact with the spacers.

Adhere double-stick tape all around the back edges of your frame. Loop the wire across the back for hanging.

Float Mounting

Spacers keep the artwork from coming in contact with the glass. Score the plastic spacer with your wire cutter. Use a ruler to measure the spacer length and mark it with a Sharpie pen.Float mounting creates a seamless presentation. With "float mounting," the artwork will look like it's hovering or floating over the backing board.

This is a very common way of mounting your artwork when you do not want a mat to cover the edge of the paper. Mounting. Mounting is the process of stretching and reinforcing artwork done on rice paper with a stronger paper involves getting the entire painting wet with paste and backing it to another paper to create a finished masterpiece.

Custom mounting of art includes drawings, oil paintings, watercolors, prints, photographs, digital prints on paper, and paintings made on canvas and linens. Art on paper can also be mounted on canvas or linen and stretched over conventional canvas stretcher bars or mounted to our archival panels.

Next, adhere the paper to the wood surface, and cover the artwork/wood piece with a clean sheet of paper as a protective barrier.

Mounting Systems

Using your palm, press firmly over the entire surface to remove any air pockets. How have standards and options for framing works on paper changed in recent years? I think the standards have always been, first, to protect the work as much as possible and, second, to make sure that anything done to the work on paper in the framing process is as reversible as possible.

Float mounting is a framing technique that's guaranteed to add dramatic flair to watercolors, old maps, handwritten letters, timeworn documents, and artwork on textured paper.

Try these easy-to-follow steps for float mounting treasured documents.

Mounting artwork on paper
Rated 3/5 based on 45 review